JBL

GTO1014D

Details
Item# GTO1014D
Product Actions
Add to cart options
$139.95139.95 each
Promotions
Availability:

This item is currently not available.


Additional Information
Get the lows bumping big with the GTO1014D, a subwoofer design triumph from the JBL® Grand Touring® Series family. It delivers deep, tight bass and serious power with a die-cast aluminum basket, polypropylene cone, rubber surround and a unique tinsel wire protector. Sure, it’s your car. But we know what your standards are – and they’re ours too.
At A Glance:
  • Big bass with Polypropylene woofer cone
  • A JBL-proprietary frame, broad installation options
  • Exceptional venting for increased power handling
  • Outstanding audio output, low distortion
  • Designed for sealed, vented, and bandpass enclosures
What's in the box:
  • (1) GTO1014D 10”die-cast dual-voice-coil subwoofer
  • (1) Owner's Manual
Get the lows bumping big with the GTO1014D, a subwoofer design triumph from the JBL® Grand Touring® Series family. It delivers deep, solid, tight bass and serious power that can only come from the leader in live performance sound. GTO subwoofers include die-cast aluminum baskets, polypropylene cones, rubber surrounds and a unique tinsel wire protector. The GTO1014D has dual 4-Ohm voice coils and 1400 watts of peak power handling so it can handle whatever you can dish out. Sure, it’s your car. But we think we know what your standards are no matter where you are and where you go – and they’re ours too.
Product Features:
  • Big bass with Polypropylene woofer cone
    Road noise can destroy realistic audio that always requires true low frequencies. Polypropylene delivers rigidity, with good internal damping, and complete weather-resistance. You get an impossible-to-miss increase in thumping bass.
  • A JBL-proprietary frame, broad installation options
    The proprietary die-cast frame design allows maximum cone excursion while reducing overall mounting depth. The die-cast structure maintains precise alignment tolerances over years of blasting music and rough roads. You get all the bass you’ve paid for.
  • Exceptional venting for increased power handling
    Woofer motor structures heat up during use, causing distortion, or power compression that reduces music’s dynamic range, robbing the sound of realism. JBL uses vented motor structures and polepieces that get rid of more heat to deliver more serious bang.
  • Outstanding audio output, low distortion
    With 350 watts RMS and 1400 watts of peak power handling, the GTO1014D changes the experience of listening to your favorite music in your car. Dual voice-coils increase system design options by allowing 2-ohm or 8-ohm operation. And a progressive spider gives better control for lower distortion at excursion limits.
  • Designed for sealed, vented, and bandpass enclosures
    Different people have different opinions on what makes for the best subwoofer box. Have it your way with the GTO1014D, it can handle anything.
Manuals & Downloads:
General Specifications:
Size
10
Series
Grand Touring
Audio Specifications:
Peak Power
1400W
Power Handling (RMS)
350W
Frequency Response
25Hz–400Hz
Nominal Impedance
2 or 8 ohms
Sensitivity
(2.83V/1m) 91dB
Power Handling (Peak)
1400W
Woofer Specifications:
Voice Inductance
@ 1kHz (Levc – mH) 1.2
Motor Force Factor
(Bl – Tm) 10.62
Total Q
(Qts) 0.44
Compliance Volume
(Vas – ft3 / l) 1.07/30.17
Free-Air Resonance
(Fs – Hz) 29.7
Mechanical Q
(Qms) 9.5
Magnetic Gap Height
(Hag – in/mm) 0.31
Suspension Compliance
(Cms – ?m/N) 193
Low-Frequency Transducer
10" (254mm) Polypropylene cone
Driver Radiating Area
(Sd – in2/cm2) 51.20/330
Voice Coil
2" (51mm) diameter
Electrical Q
(Qes) 0.46
Maximum Excursion
(Xmax –in/mm) 0.57/14.5
Voice Coil DC Resistance
(Hvc – in/mm) (Revc – ohms) 1.88
Voice Coil Height
(Hvc – in/mm) 1.45/37