Marine 7005A
$474.95 each $499.95 to Save 5%

Features

Marine 7005A Compact size - Image

Compact size

The Infinity marine 7005A amplifier feature a low-profile chassis and a small overall footprint to fit in more marine where available space is limited.

Marine 7005A High and low level input - Image

High and low level input

Speaker-level and low-level inputs allow the marine 7005A to integrate with both aftermarket and factory marine stereo systems.

Marine 7005A Variable crossover and bass boost - Image

Variable crossover and bass boost

Unlike many amplifiers available at similar prices, Infinity marine 7005A feature variable electronic crossovers and bass boost circuit to allow for fine-tuning.

Marine 7005A Low noise and distortion - Image

Low noise and distortion

Produces tight bass with low distortion at high SPL. Balanced Differential Inputs are used to ensure low noise.

Marine 7005A Input Level Control - Image

Input Level Control

When low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 4Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 1Vrms and 22Vrms.

Marine 7005A Full on-board protection - Image

Full on-board protection

The on-board circuitry to protect them from shorts, temperature, overvoltage and undervoltage. An LED indicator is included on all four models to let you know when one of these conditions exists.

Marine 7005A Phase Switch - Image

Phase Switch

This switch changes the input phase to inverted or non-inverted. This is especially helpful with the subwoofer channel.

Marine 7005A RBC wired remote - Image

RBC wired remote

The RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from driver's seat.

Marine 7005A Class AB+D amp technology - Image

Class AB+D amp technology

The Infinity marine 7005A 5channels subwoofer amplifier delivers 760-Watts RMS using a Class AB+D amplifier design to ensure high output and minimum current draw.

Marine 7005A Turn-on mode - Image

Turn-on mode

This switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice .A selectable "Turn-on mode" can protect battery to avoid current drain, when you don't expect turn on your amplifier.

Specs & Downloads

Item# INFM7005AAM

Description

Infinity's marine 7005A 5-channel amplifier provides a full system solutions without breaking a sweat, and it'll look good doing it. It delivers 50-Watts RMS to each of the front and rear speakers, and a ground pounding 500-Watts RMS to the subwoofer channel — a much better balance of "speaker-to-sub" power than most of conventional 5-channel amplifiers on the market. For higher output, you can bridge the amp to 3-channel mode and power your front speakers with 140-Watts per channel, while still delivering 500-Watts to the subwoofer channel. Speaker-level inputs allow the marine 7005A to work in almost any system, even if you're keeping your marine's factory radio. Separate high-pass and low-pass crossovers on the front and rear channels and dedicated low-pass crossover, bass boost, and phase switch for the subwoofer channel provides an incredible amount of control and tuning capability. The marine 7005A is truly a total system solution in one easy to install chassis.

What's in The Box?

  • One marine 7005A five channel amplifier
  • 4 Bare wire-to-RCA adapters
  • Six 30A ATO fuses (3 installed, 3 spare)
  • Remote bass control module
  • 16.5' Remote control cable (RJ-25 plugs on both ends)
  • 2 Self-tapping screws for remote (M3 x 15mm)
  • 4 Mounting screws (M4 x 53mm)
  • Owner's Manual
  • 2 Infinity decals
  • 1 logo badge
What's in The Box?

Documents & Downloads

Reviews

Customer Reviews

Support

Register your Harman Audio product

Do you own this product? Register it here in case you need to claim warranty

Register Now

Can't find what you're looking for?

Are you looking for product support, documentation, how-tos or older products?

Harman Audio Support