DriveRack VENU360-D

  • Select Color
    • Black
Product Actions
Add to cart options
$599.95599.95 each $1,299.95 Save $700

In Stock

UPS-BOX Order by 18 hrs 51 mins with 2 Day Shipping and receive by Fri, Nov 16
Your zip code 20149 edit | Want it faster?

Additional Information
The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers.
At a Glance:
  • Dante™ audio-enabled
  • AutoEQ™
  • Enhanced AFS™ feedback elimination
  • Updated wizard setup functions
  • Mobile control
dbx took the dominant DriveRack® 260, improved its features, and added more. The result? The 3 input, 6 output DriveRack VENU360. The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation. The VENU360-D model provides all the features of the standard VENU360 model but adds Dante-enabled RJ-45 ports for interfacing with other Dante-equipped devices. It offers a 7x6 routing/mixing matrix (using any available combination of AES, analog, and Dante input channels) and a 3x6 signal processing chain.
Product Features:
  • Input processing
    dbx compression, AFS™ (Advanced Feedback Suppression), 31-band graphic EQ, 12-band parametric EQ (with narrow notch capabilities), subharmonic synthesis, backline delay, and noise gate
  • Output processing
    Crossover (supports full range up to mono 6-way systems), 12-band AutoEQs (8 AutoEQ bands, 4 User bands), dbx compression, automatic gain control, subharmonic synthesis, noise gate, tower delays (up to 1000ms per output), 8-band parametric EQs (used for speaker tunings), dbx limiting, and driver alignment delays
  • Tested wireless routers
    Dlink 636L, Dlink Cloud router 2000, Cisco / linksys: WRT54G2V1, Netgear WGR614 v7, and Netgear WNR 1000. (Other routers are likely compatible. This list represents those which have been tested thus far.)
Manuals & Downloads:
General Specifications:
Alignment Delay
Up to 1000 ms per output channel
A/D Converter
24-bit with dbx Type IV™ Conversion System
A/D Dynamic Range
117 dB A-weighted, 114 dB unweighted, 22 kHz BW
Type IV Dynamic Range
129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW
D/A Converter
D/A Dynamic Range
116 dB A-weighted, 113 dB unweighted, 22 kHz BW
Internal Processing Wordlength
32-bit floating point
Supported Sample Rates
48/96 kHz (32-192 kHz using sample rate conversion)
System Performance Dynamic Range
114 dB A-weighted; 110 dB unweighted
0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response
20 Hz – 20 kHz, +0 /- 0.5 dB
Interchannel Crosstalk
< -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured
Analog input to output
Operating Voltage
100-240 VAC 50/60 Hz
Power Consumption
18 W
Audio Specifications:
(3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input
Input Connectors
(3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
Input Type
Electronically balanced/RF filtered
Input Impedance
> 30 kΩ, balanced line to line
Max Input Level (line inputs)
> +28 dBu, balanced, ≤1% THD
> 50 dB @ 1 kHz
RTA Mic Preamp Phantom Power
+48 VDC
(6) Line Outputs
Output Connectors
Male XLR
Output Type
Electronically balanced, RF filtered
Output Impedance
120 Ω, balanced line to line
Max Output Level
+22 dBu, balanced, ≤1% THD
DANTE™ Audio Connectors
2 x RJ-45 connectors
DANTE™ Audio Maximum Cable Length
100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable between devices
DANTE™ Latency
1.75 in (4.4 cm)
8.0 in (20.32 cm)
19.0 in (48.26 cm)
Unit Weight
5.48 lbs. (2.49 kg)
Shipping Weight
7.10 lbs. (3.22 kg)
DriveRack VENU360-D is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Great quality for small money I bought this DSP for my speakers and I really enjoy using this very much. Sound quality is not that great compare to some of the dsp giants like "Lake" or "Powersoft", but for that amount of money it is really good deal. Using dbx software is very easy. One big disappointment is that they do not update speaker and power amplifier data base. Even from sisters Harman companys so I gave them 4 stars.
Date published: 2018-09-17
  • y_2018, m_11, d_13, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_driverackvenu360-d, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

Can you link 2 (or more) venu360's together and use them as one? For instance, using one on the left side of a sound system and another on the right...

Asked by: Audioguy67
We would like to work with you directly to help you with your issue. Please submit a case request at https://dbxpro.com/en/support and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer Service
Date published: 2018-06-11
  • y_2018, m_11, d_13, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_driverackvenu360-d, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio

Search Result For ""

2 Years

Products purchased online or from an authorized local retailer and under warranty may qualify for an exchange with a valid receipt.

Purchases made from an unauthorized dealer will not be eligible for exchange.

Request an Exchange