dbx

DriveRack VENU360-D

Details
Item# DBXVENU360D-V
Variations
  • Select Color
Product Actions
Add to cart options
$1,299.951299.95 each
Promotions
Free Ground Shipping On This Item
Availability:

This item is currently not available.

General Specifications

Alignment Delay Up to 1000 ms per output channel
A/D Converter 24-bit with dbx Type IV™ Conversion System
A/D Dynamic Range 117 dB A-weighted, 114 dB unweighted, 22 kHz BW
Type IV Dynamic Range 129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW
D/A Converter 24-bit
D/A Dynamic Range 116 dB A-weighted, 113 dB unweighted, 22 kHz BW
Internal Processing Wordlength 32-bit floating point
Supported Sample Rates 48/96 kHz (32-192 kHz using sample rate conversion)
System Performance Dynamic Range 114 dB A-weighted; 110 dB unweighted
THD+Noise 0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response 20 Hz – 20 kHz, +0 /- 0.5 dB
Interchannel Crosstalk < -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured
Latency Analog input to output
Operating Voltage 100-240 VAC 50/60 Hz
Power Consumption 18 W

Audio Specifications

Input (3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input
Input Connectors (3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
Input Type Electronically balanced/RF filtered
Input Impedance > 30 kΩ, balanced line to line
Max Input Level (line inputs) > +28 dBu, balanced, ≤1% THD
CMRR > 50 dB @ 1 kHz
RTA Mic Preamp Phantom Power +48 VDC
Output (6) Line Outputs
Output Connectors Male XLR
Output Type Electronically balanced, RF filtered
Output Impedance 120 Ω, balanced line to line
Max Output Level +22 dBu, balanced, ≤1% THD
DANTE™ Audio Connectors 2 x RJ-45 connectors
DANTE™ Audio Maximum Cable Length 100m/328ft on Category 5 (100Mbps) or Category 5e/Category 6 (Gigabit) cable between devices
DANTE™ Latency 0.15ms-5.0ms

Dimensions

Height 1.75 in (4.4 cm)
Depth 8.0 in (20.32 cm)
Width 19.0 in (48.26 cm)
Unit Weight 5.48 lbs. (2.49 kg)
Shipping Weight 7.10 lbs. (3.22 kg)
dbx took the dominant DriveRack® 260, improved its features, and added more. The result? The 3 input, 6 output DriveRack VENU360. The VENU360 provides all the processing and flexibility you need between your mixer and amplifiers to optimize and protect your loudspeakers. With the latest advancements in dbx’s proprietary AutoEQ™ and AFS™ algorithms, additional input channels, ethernet control via an Android,® iOS,® Mac,® or Windows® device, and updated wizards, the DriveRack VENU360 continues the DriveRack legacy of great-sounding, powerful, and affordable loudspeaker management processors, for a whole new generation. The VENU360-D model provides all the features of the standard VENU360 model but adds Dante-enabled RJ-45 ports for interfacing with other Dante-equipped devices. It offers a 7x6 routing/mixing matrix (using any available combination of AES, analog, and Dante input channels) and a 3x6 signal processing chain.

Search Result For ""

2 Years

Products purchased online or from an authorized local retailer and under warranty may qualify for an exchange with a valid receipt.

Purchases made from an unauthorized dealer will not be eligible for exchange.

Request an Exchange
DriveRack VENU360-D is rated 4.0 out of 5 by 1.
Rated 4 out of 5 by from Great quality for small money I bought this DSP for my speakers and I really enjoy using this very much. Sound quality is not that great compare to some of the dsp giants like "Lake" or "Powersoft", but for that amount of money it is really good deal. Using dbx software is very easy. One big disappointment is that they do not update speaker and power amplifier data base. Even from sisters Harman companys so I gave them 4 stars.
Date published: 2018-09-17
  • y_2019, m_1, d_18, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_driverackvenu360-d, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

Can you link 2 (or more) venu360's together and use them as one? For instance, using one on the left side of a sound system and another on the right...

Asked by: Audioguy67
We would like to work with you directly to help you with your issue. Please submit a case request at https://dbxpro.com/en/support and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer Service
Date published: 2018-06-11
  • y_2019, m_1, d_18, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.9
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_driverackvenu360-d, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio
Sharing